How To Get Professional Banner Designs For Your Inside Banner

How To Get Professional Banner Designs For Your Inside Banner

Make Your Message Call Out with the Deluxe Attention Getter Feather Flag-with Spike or Cross Base

Imagine a wide pathway that curves along like a lazy river. Grownups stroll with their kids, no hurry, but without delay, but with a purpose. They're going to a particular place.

You happen upon this place under clear azure skies and soft winds, but it is not so much the continuous flow of people coming to something that grabs your interest. it is the fluttering Deluxe Attention–Getter custom banners displayed along the pathway that , that cause you to pause and take a second look. It is as if the Feather Banners are inviting the people along.

"Come This Way!"

There they are along the walkway, like announcers speaking out "Come this way!" And as you look at them fluttering, almost in sync with the breeze, you discover yourself interested in what they're saying. And you realize how powerful these banner flags are at gaining interest, at speaking to people walking or driving past.

It's an effective way to announce to your products, services or events—open houses, special sales, and more!

An Effective Medium

Feather Banners

Step 1: Remove all pieces out of the case.

Step 2: Select the location for the banner display on dirt or grass. Press the sharp end of the Spike Base firmly into the ground.

Step 3: Put together Bottom Pole w/Shock Cord. Set the base of the Top Pole firmly into the opening on the top side of the completed Bottom Pole.

Step 4: Set the Cap end of the Top Pole into the bottom of the Flying Banner. Gently slide the Pole into the Flag until the End comes to the top side. Guide the Cover into the double–stitched place at the top end of the Feather Flag and be sure that it is completely in.

Step 5: Pull on the Pull Strings at the bottom of the Flying Banner. The top of the Pole will bend as the Banner is moved into place. Tie the Pull Cords securely to the Banner Tie–Down Clip near the bottom of the Completed Shaft. Loosen the thumb screw on the Flag Securing Clip and move the Clip accordingly to get just the right tension on the banner.

Step 6: Slide the base of the Lower Shaft over the Locking Shaft on the Spike Base. Press down until secure. Slide the Locking Ring down and turn slightly to secure in place, noticing the small notches and channels that keep the Locking Ring from moving when not lined up correctly.