How To Get Professional Looking Designs For Your Interior Business Banners

How To Get Professional Looking Designs For Your Interior Business Banners

Large Design Banner Metal Display for Outdoor and Interior Usage

Have you seen them? They move by us on the sides of big trucks. They speak to passersby from their perches on outdoor structures. And they welcome us into museums, elite stores, conventions, malls, and even corporate sites.

They're crystal clear and eye-catching, and we can't avoid noticing them.

They are custom banners, and they're a dynamic and effective approach to getting your marketing message out.

What If ... ?

What If you could announce your company's message that way? If only your business message and logo grabbed the attention of thousands of new prospective customers?

How would that affect your profits, if your business could get the kind| of "Wow" attention it truly deserves?

Sounds great, but how about cost on these custom signs?

Won't That Drain My Marketing Account?

But large size banners are a true budget drainer, aren't they?

They're made for the large companies with {extensive|deep advertising dollars, aren't they? How am I supposed to manage that?

Well, you might be pleasantly surprised.

They're Simple and Cost Effective

You'll be happy to know just how simple and cost effective these extended banners are.

Now, because of an innovative new framing method, TheSignChef.com is pleased to offer you professional, affordable, Large Format Banners.

Now you are able tohave your slogan and images in beautiful colors-in a large banner format.

TheSignChef.com can custom cut your banner and frames to match the size of your particular design-all at a cost-effective price.

Here's What You Get

* Simple installation to transform almost any site or delivery truck into a mobile advertisement
* No hems, grommets, bedding, or cables involved
* Use for indoor or outdoor
* Permanent or short-term displays
* Frame styles of any configuration
* Built of lightweight yet durable heat-treated aluminum
* Custom ordered to precisely fit your van or advertising location
* Drum-tight tension on graphic/banner, giving it a crystal clear quality
* Switch graphics simply and quickly, for repeated use.

Imagine

Imagine your company's message and logo professionally announced on a crystal-clear, extended size banner-all at an affordable price.

Imagine your display inviting prospects clients to purchase your good and services.

Now, how do you make it happen?

"What Do I Do Next?"

You start the process of designing your new Large Format Banner by clicking on www.thesignchef.com.

We provide FREE online design services ready, at your finger tips anytime day or night. Use our exclusive specialized system, Sign Magic, to create precisely the banner you need. Give it a go. You don't have to buy anything.

We're also available for Live Design, if you want individualized, one-on-one.

Contact us at 800-899-6272 or click on our online site at www.thesignchef.com and we will assist you in getting your Large Format Banner up and selling!

How to Install a {Aluminum Banner Frame|Vinyl Graphics|Banner| on a Vehicle

most common aluminum framing material for this purpose is the TS21 Aluminum bar.

You can attach the TS21 {frame|bar| with mounting screws on the delivery vehicle, trailer panels, or employ the other method that some of our customers have used to do the job by making use of double-sided tape. The tape needs to be an Ultra or Very High Bond (UHB/VHB) double-coated tape employed to make a strong long-lasting bond. Foamed acrylics typically conform better to an uneven or concave surface than a solid acrylic. In this illustration the client is using a solid acrylic tape.

When you have calculated and cut the bars to the desired measurement, install the tape on the bar. Make sure that the surface of the truck is squeaky clean. Completely wipe away dirt, spilled fuel, grime and grit residues.
After install the bars to the truck side.

You will get a solid railing system in which to install your graphic.

The graphic will be secured on all sides of the aluminum rails.

To install the clamping bar TS80 see: "Installing TS80" PDF located on the web site (www.tensioningsolutions.com ) at the tab "installing Tips"

As demonstrated in "Installing Graphics" begin by positioning and putting in place the banner utilizing 4" long TS80 pieces.

Then substitute the 4" TS80 with the 11' 5" bar.

At the corners let the TS80 bars to cross over, and utiliIizing a hacksaw cut the two additional pieces (Look at "Installing the Graphic" on our Internet site www.tensioningsolutions.com). When finished, it is ready to trim the extra graphic with a cutting knife.

Now you are done with a very tight tension graphic mounted! When the banner is securely fixed on all four rails you'll have issue related to weather or truck speed on the roadway (veil effect).


How to Exchange Banners in Your Aluminum Rail Frame

Place the banner rail on a wall. Then position the graphic starting
from the top.

At every foot push in, at the top, a 2" piece of TS80.

Move further along the rail and insert the two inch TS80 on the side rails.

Then, complete the lower edge of the graphic.

The graphic is not tensioned during this part of the installation, you'll tighten the banner when exchanging the two-inch sections with an entire TS80 bar.

Replacing the 2" sections with a TS80 rail.
Begin with the top and remove the initial 2" TS80 and put in the TS80 bar with a dead blow hammer. The TS80 has to be inserted at a slant Always leave an extra 4" length on both sides of the frame.

Continue to replace the two-inch pieces with the TS80 bar on the sides and finish at the bottom.

Very Important: The graphic tension is applied when the TS80 placed at an angle is flattened by utilizing a dead blow hammer.

When the four TS80 rails are in place, start cutting the TS80 utilizing a hacksaw or a cutter.

Tip: Use both the cutter and the hacksaw and go with the tool that is the most effective.

Continue using the hacksaw, scratch| a mark on the bottom of the TS80 that you'll use as guide to saw the other TS80 bar.

Now use the dead blow hammer to flatten the 2 TS80 bars.

The last step: Utilize a knife to remove the excess graphic material around the custom banners, {using the TS80 as your guide. You are done!