How To Get Professional Banner Designs For Your Interior Business Banner

How To Get Professional Banner Designs For Your Interior Business Banner

Get Your Marketing Message to Speak Out with the Deluxe Attention Getter Banner Flag-with Spike or Cross Base

Imagine a wide pathway that meanders along like a slow–moving river. Grownups stroll with their kids, no hurry, but without delay, but with a plan. They are going to a particular place.

You come across this place under crystal azure skies and gentle breezes, but it is not so much the steady flow of walkers coming toward a place that gets your attention. it is the fluttering Deluxe Attention–Getter custom banners displayed along the walkway that , that make you pause and take notice. It's as though the Feather Banners are ushering the crowd down the path.

"Come This Way!"

There they are along the walkway, like heralds calling out "Come this way!" And as you look at them fluttering, almost in sync with the wind, you discover yourself intrigued. And you realize how strong these banner flags are at gaining interest, at getting a message to people walking or driving past.

What a great medium to use to market your event, or open house, or business!

An Effective Medium

They

Step 1: Take all parts out of the case.

Step 2: Choose the location for the banner display on dirt or grass. Press the sharp end of the Spike Base firmly into the ground.

Step 3: Put together Bottom Pole w/Shock Cord. Place the footer of the Top Pole firmly into the hole on the top side of the completed Bottom Pole.

Step 4: Set the Cap end of the Top Pole into the bottom of the Flying Banner. Slowly feed the shaft into the Banner until the End comes to the top side. Guide the Cover into the double–stitched place at the top end of the Feather Flag and ensure that it is all the way in.

Step 5: Pull on the Pull Cords at the bottom of the Flying Banner. The top of the Pole will bend as the Flag is pulled into place. Tie the Pull Cords securely to the Banner Securing Clip near the bottom of the Completed Shaft. Loosen the thumb screw on the Flag Securing Clip and move the Clip up or down to adjust tension on the banner.

Step 6: Push the base of the Bottom Shaft over the Locking Shaft on the Spike Base. Exert pressure downward until secure. Push the Locking Ring downward and rotate slightly to secure in position, noticing the small notches and channels that keep the Locking Ring from moving when not lined up correctly.